SPLIFF®

The Spliff is a 3-way signal splitter with discrete Class-A buffers with one output transformer isolated with phase side-switch. Putting the Spliff before and after your pedal board reinstates your tone and removes all the top end loss (capacitance) that running a board full of true bypass pedals will inflict on your tone.

With 3 outputs, the Spliff is the perfect companion for the mini Zuul® or Zuul®+, just plug in one of the outputs to the ‘Key In’ on the Zuul®+ and your original, clean, guitar signal will be the one controlling the Zuul®+. A mind blowing amount of options are available to you with the Spliff, not only can you trigger your gate, but you can send one signal to your amp and another to the interface so you are recording the signal before it hits amp saturation - with this additional control, you can re-amp the guitar afterwards to ensure it is sitting perfectly in your mix. You can also run multiple amps simultaneously, making your tone bigger than it has ever sounded.

OUT 3 is transformer-isolated with phase switch. To make your life as simple as possible, the tuner out is always ‘on’ allowing you to not only tune quickly, but make sure your dive-bombs hit the perfect exit note. The Roach is an exceptionally low-current circuit and can be run on a 9vdc battery for the longest time, or an external power supply can be used via the DC inlet, between 9-24vdc.

Indicator Green LED for active, Red LED mutes OUT 1-3.

A mosfet input protects if the wrong orientation adapter is connected, no more damage internally (the pedal will not power up).