Fortin NATAS Pedal logo

THE LEGEND LIVES ON


Many Fortin amps have achieved legendary status over the years - but only one has had players constantly talking, constantly chasing and constantly looking to recreate the legendary tone.

We want players to be able to find that tone from their own rig, be able to drop the NATAS pedal in and feel the brutal power, absolute articulation and depth of gain that made the NATAS amp the legend it is.

The NATAS is a staggering feat of engineering, a sound and response never experienced from a gain pedal - cascading gain stages, a perfectly placed 3 band active EQ, additional Kill gain boost and a Mid Shape (mid scoop or hump) switch, ensures that the NATAS Distortion brings the authentic Fortin tone to a dirt pedal, for the very first time.

Unleash Pure Sonic Chaos with the Fortin NATAS Pedal: where raw power meets relentless clarity. Are you ready to harness the darkness?

Complete tonal control with the Girth and Grind controls. Tweak your tone to a level never before achieved.

KILL Boost

Adds an additional gain stage - the kind that does nothing other than melt faces


The finer details...

Controls

  • の上: トゥルーバイパス、リレーベースのソフトフットスイッチ - NATAS は電源をオフにしたときと同じ状態で電源が投入されます。
  • 殺す: 追加のゲイン ステージを追加します。最高の方法で、かなりクレイジーなサウンドを実現できます。
  • ベース: アクティブ回路。低音をどの程度追加または削減するかを制御します。
  • ミッド: アクティブ回路。中音域の量を調整します。
  • トレブル: アクティブ回路、高周波を制御します。
  • ガース・アンド・グラインド: ここでトーンの形成が行われます。これらは両方とも、トーンに生命を与える特定の周波数を励起します。まるで弦が指の下で跳ねているように感じられます。
  • ミッドシェイプ: ベース トーン全体に EQ カーブを配置して、よりモダンでスクープされたトーン、またはよりクラシックなミッド ハンプを実現します。これを使用して、ハンプでトーンを引き締めたり、スクープ設定で完全にスラッシュしたりできます。

Technical

  • 米国製。
  • 優れたサウンド、レスポンス、信頼性のために選ばれた最高級の素材。
  • 業界標準の 3DPT リレー トゥルー バイパス スイッチング。
  • 9vDC センターピンマイナス (完全安定化) 外部アダプタ/電源のみ (付属していません)。
  • 消費電力: 150mA @9vDC (NATAS は起動時に電力を大量に消費する、非常に強力なデバイスです。電源投入時には、最低 600mA の入力電流 (突入電流とも呼ばれます) が必要です。電源がオンになると、ペダルは安定した 150mA の電流しか必要としません。)
  • ペダル寸法 (幅/奥行き/高さ): 4.8” x 2.64” x 1.6” (122mm x 67mm x 39.5mm)、ノブとスイッチを除く。
  • 発送重量: 0.4kg
  • Fortin の限定 1 年間保証が含まれます。
  • 世界中に発送します。すべての掲載価格は米ドルです。

  • 回路の性質上、NATASディストーションペダルは電源投入時に最低600mAの入力電流を必要とします。電源投入後はペダルは約150mAを消費します。

Frequently asked Questions

NATAS にはどれくらいの電力が必要ですか?

NATAS は電力をかなり消費するため、バッテリー クリップはありません。バッテリーは最大で約 1 時間しか持ちません。

NATAS に電源を入れるには、ペダルに約 600mA の初期「スパイク」が必要ですが、いったん起動して動作すると、約 150mA を消費します。

NATAS に高品質の電源を供給することが極めて重要です。

EQ はアクティブですか、パッシブですか?

EQ は応答性が非常に高い 3 バンド アクティブ EQ なので、周波数をカットするだけでなく、追加することもできます。

ペダルはアンプと同じですか?

マイクは、アンプの音色、そして最も重要な感触にできる限り近づけました。NATAS を NATAS アンプのパワー セクション、または Neural DSP NTS スイートの IR セクションに接続しても、音色の違いを聞き分けるのは非常に困難です。

Where are Fortin Pedals made?

All Fortin pedals are made in the U.S.A.

×